Use
The explosion-proof vacuum oil filter is specially used for the operation of petroleum, oil-chemistry, coal mine, chemical industry, power plant, power station, railway, mine, machinery industry, etc. where there is flammable and explosive substances. It can treat the polluted oil and make it improved as good as that meets the demands of the State Standard. The kinds of oil include isolating oil (such as transformer oil, circuit breaker oil, mutual inductance device oil, capacitor oil, cable oil, etc.), turbine oil, hydraulic oil, lubricating oil, heat conductor oil, quench oil, gear oil, freezer oil, compressor oil. The treated oil can resume the previous operative function. It can be used on-line by serial connection with safety. This kind of machine can be used to purify the transformer oil, turbine oil, compressor oil while the working assemble is still operating on normally without stopping production, without power off, without stopping the machine. The oil treated can be good enough to use, thus, to make the equipment and oil quality workable condition last longer.
Characteristics
We are the only enterprise to enjoy the qualification certificate of explosion-proof vacuum filter production in China. It can be used in the special industrial and mine environment where there are some substances prone to being on fire and/or explosion. The special heat exchanging device can make most of the vapor from the hot air drawn out change into water drops, thus, to avoid it going into the vacuum pump. Therefore, the vacuum pump oil will not be emulsified during the operative process. It will not erupt out, either. Thus, the 2 big problems that were very troublesome before have been successfully solved. The vacuum pump?s service life has greatly been extended. It is in the position of leading the way in the similar technology in China. All the parts of this machine have been treated with phosphorization.
These serial products are of high efficiency, low-energy consummation, easy operation, and easy maintenance. They are small in size and light in weight and easy to move. They are the right products to replace the plate-frame oil filter, centrifugal oil filter and the old-style vacuum oil filter.

Work process
Oil inlet?first grade filter?explosion-proof heater?explosion-proof vacuum separater?cooler ?explosion-proof vacuum pump?waste gas
Second grade filter
Oil outlet?fine filter?initial filter?explosion-proof oil pump?explosion-proof radiator?purifying device
Tech parameters

Characteristics

1. This type of machine is made of whole stainless steel, special seal materials and special filter materials that ensure the good suitability for the phosphate anti-fire oil without leaking and corrosiveness.
2. This machine is designed for the characteristics of phosphate anti-fire oil to work in low temperature and physical purification only, which will not bring any damage to the machine. The function of absorbing and anti-absorbing independently created by this Company can greatly reduce the operation cost.
3. This machine is light and convenient for moving. It can be used on-line operation and changed to move for filtering.
4. This machine is multi-functional oil filter. It has the five functions as for dehydration, degasification, impurities elimination, acid removing, emulsion breaking and foam removing. This machine is of high automatic system and it can stop automatically when the pressure is too high for self protection. It has the magnetic oil level intelligence for automatic compensation when necessary. If any breakdown, the whole machine can reduce pressure automatically and self stop and give warnings. It can operate safely on-line without manpower watching by.

Working process
Oil inlet ----filter----heater----vacuum tank----cooler----vacuum pump----pump oil purifying device
---- reaction ----
Oil outlet ----filter ----initial filter---- gear pump----
Water pump ----condenser
Use
It is specially used for the purification and re-generation of anti-fire hydraulic oil in the speed-adjusting system of the power generating set over 300 thousand KW. Considering the characteristics of phosphate, the machine is made of whole stainless steel and special sealing materials to ensure the well suitability of the materials and phosphate without leaking, and corrosiveness. It works only in low temperature and physical purification only. Therefore, the oil will not be re-polluted.

Tech parameters

Use and characteristics
The equipment of HYF device can separate the light oil (burning oil) from all kinds of mixed lubricating oil. It is used to purify the parts washing oil (such as kerosene, diesel, and gasoline) in aviation, spaceflight, vehicle, motorcycle, bearings, manufacturing industry, precision tool making and processing industry, etc. The color difference between the oil treated before and after can be within only 1%. The PH value reaches the standard of new oil (grade 6). The washing oil, such as aviation kerosene, used in bearings manufacturer and gears manufacturer, is often mixed with much lubricating oil, such as rust-resisting oil, grinding oil, etc. The HYF separating device of this Institute can surely be used to separate them, meanwhile, to separate the moisture content, mechanical impurities, sediments and corrosive materials efficiently (separating degree reaching 100%). The cost to treat one ton of oil is only within 70 RMB Yuan. And it can be used repeatedly. The selling price of this device is much low. It is simple and easy to operate. The rate of recovery can reach 98% of the waste oil (except the oil mixed with phosphor and super fine liquid).

HYF Parameter chart

Work process
Oil inlet ----filter----heater----vacuum tank----cooler----vacuum pump----purifying device
----filter
Oil outlet----filter---- initial filter----gear pump
Water cooler----wind cooler----condenser

Characteristics
This type of machine is fashionable in structure and reasonable in design with good performance and high automatic function. It is easy to operate. The principle for purification is physical methods. The filter system is made of high element compound materials. Therefore, the filtering is precision without filter paper. It is no necessary to change the materials in its using term of life. And it is inversely self-washing. It is widely used in multiple purposes, neglecting conditions in the environment and locations. It can purify and regenerate the scattered waste oil. It can be used on-line for regeneration and purification.

Use
It is mainly used for all waste oil of various industries such as mine, metallurgical and petroleum industry, railway, machinery, chemical industry, instruments and so on, for degasification, dehydration, and aqueous acid/alkali impurities elimination. The moving viscosity and flashing point will be enhanced. The oil treated this way will be improved well enough for using according to the State Standard (new oil standard GB443?84).

Tech parameters

Working process
Oil inlet----filter----heater----emulsion-breaking device----separating 1----separating 2
----waste discharging pump----
Vacuum tank----gear pump----filter----oil outlet
Vacuum tank----condenser----water pump----radiator
condenser----vacuum pump----purifying device

Characteristics

1. High efficiency in dehydration and emulsion breaking. It can easily separate the large quantity of water from oil and eliminate the micro moisture content in oil as well.
2. High efficiency in filtering and purification. It can quickly make the worsened, polluted oil back to the quality as good as that of the controlled standard of turbine oil polluted degree for normal operation, with the particle-size
3. High safe automatic operation without breakdown. It does not waste oil when purifying oil in succession. No leaking as is connected by stainless steel valves.
4. It is simple and easy to control the whole machine with safe, advanced, and reasonable design. The advanced magnetic automatic compensation system for oil level avoids the oil pump working in vain or oil escaping that occurred very often in other common oil filters. The automatic controller for pressure is installed. When pressure is too strong, it gives warning and stops automatically. Then the self-discharge vacuum device works. The electric valve can close itself to avoid the possibility of oil backward into or escaping from the generator. It is on-line safe operation without manpower watching by.

Use
JT serial oil purifying machines for turbine oil can be used for purifying the turbine oil of generating set and transformer oil. They can be used to deal with hydraulic pressure oil that is widely used in metallurgical industry, petroleum industry, chemical industry, mine industry, railway, aviation and spaceflight industry, ship and vessel industry, machinery industry and so on. It can be used to purify the machinery low-viscosity lubricating oil.
This kind of machine can efficiently dehydrate the emulsified oil that has been seriously polluted by water. And the vapor, acid matter, saponin, gluey color matter and mechanical impurities can be eliminated from the polluted emulsified oil as well. The emulsified oil after purification this way can become tranquil and clean. Thus, it proves quite a success to solve the problem as to water elimination and oil purification for generating set that has been very troublesome before.
This machine can be used not only for dehydration, emulsion breaking, filtering and purification, but also for on-line operation by series connection. It can be used to remove the solid impurities from the pipes of generating set and devices at any time when necessary according to the second need of the generating set.
Tech parameters

Work process
Oil inlet----filter ----heater----vacuum tank----cooler----screw magnetic pump----purifying device
----filter ----vacuum oil chamber ----vacuum pump
Oil outlet----fine filter----initial filter----gear pump/screw pump
----water pump----condenser

Use
This kind of filter is mainly used for all kinds of low-viscosity oil (lower than No.40) and low-volatility oil in the large and mediate scale power systems. It is used to purify the isolating oil, turbine oil and machinery oil of large, mediate and small transformers, current-voltage mutual inductance device, capacitor, circuit breaker, and oil switch and so on. This kind of machine can work on-line to purify the worsened oil without stopping the electrified transformer, mutual inductance device, oil switch and so on. Thus, the oil can be improved back to its new quality level and resume its working function.

Characteristics

1. This Institute initially develops this new generation of efficient double-grade vacuum oil filter that has been greatly improved on the basis of the traditional vacuum oil filter. It adopts the unique horizontal structure and double-grade vacuum 4-filter technology that is advanced. The period of reproduction of oil is short with less energy. The filter paper is not used here and the automatic level is high.
2. The macromolecular compound filtering material is adopted and the whole process is pure physical way that is a free carbon filtering system in this kind of machine.
3. Four-grade filtering system ensures the tranquil and precision quality of the treated oil. And it is self-washing inversely.
4. The vacuum recycling cooling device is independently created by this Company. The water cooling and wind cooling can be exchanged at random. It greatly benefits the users in the cold weather or cold region when and where the water often changes into ice, which influences the normal operation.
5. The vacuum pump oil purifying system of emulsion-breaking circulation is designed by this Institute. Thus, the problem of emulsification of operative oil that has been a long-term troublesome problem is thoroughly solved.
6. The high function of vacuum machine set, which adopts the Company?s unique technology of vacuum degasification by specially-made oil pump, can even more efficiently eliminate the acetylene and other poisonous gases in the treated oil.

Tech parameters

Work process
Pump oil purifying device----vacuum pump----water tank----cooler (strong wind cooling)
Oil inlet-----heate----filter----vacuum tank (automatic controller)
Oil tank----oil pump
----plate and frame filter----
Oil outlet ----optionally matching A or B
----fine filter----
Use
This equipment is used to purify the used machinery oil, hydraulic oil, compressor oil, motor oil, mediate-load gear oil, cooler oil, steel rolling oil, quench oil, flash swift quench oil, etc. in mine, metallurgical industry, machinery, chemical industry, rubber industry, instrument, traffic, petroleum drilling and exploring, construction ceramics, precision pressure casting, etc. The oil to be treated is from No.5 to No.1500 that is in high, mediate or low viscosity in movement. This kind of machine is specially used to purify the oil from cement, chemical and fertilizer production. Sometimes the oil to be treated has as much as 70% impurities in it, such as aqueous acid, ammonia acid, carbon, dust-sand-clay, moisture content, etc. The water separated form the oil treated by this equipment has different colors: the water color can be milk white if the aqueous acid in it is serious. The color can be blue if the ammonia acid in it is very much. The color can be white if the oil has been seriously polluted by alkalis. The waste water from the treated oil has much snow-like floating matter on it. This equipment takes only the physical principle methods to treat the oil. It takes no chemical agent for purification. Therefore, the oil treated remains its original color.
Characteristics

1. The vacuum oil filter researched and developed by this Institute can treat low and high viscosity lubricating oil in various kinds. It needs no special conditions on environment except electricity and waste oil. The waste oil can be treated everywhere and whenever. The operation is simple and easy. The maintenance for the equipment is simple and easy, too. And the cost is very little. The electricity consummation is only 50% of the whole machine in summer and 60% in winter.
2. When using this equipment to deal with any polluted oil, no chemical agent is needed. It is purely mechanical and physical purifying methods. Thus, the oil treated remains the same nature and function.
3. Wind cooling method is adopted. Therefore, the vapor separated from the polluted oil can be condensed into liquid in only 2 seconds and discharged completely soon. Thus, the water source is protected as the water cooling method consumers much fresh water (it is special suitable for treating the high-viscosity oil and the water-in-oil that is quite abnormal.)

Tech parameters

Technical Features:

1.      The Purifier uses a physiochemical reaction to eliminate the electric charge between polar particulate in waste oil, which is gathered into large particles and separated; also the colloid, bitumen and other compound in oil are also removed. In the meantime the waste gas cleaner and vacuum dewatering functions remove water content, thus oil is cleaned and the effective content of oil is retained.

2.      High precision stainless steel net is used, which is anti-corrosive, high temperature resistant and has a good mechanical strength and long lifetime; the easy-to-use, economical and practical pressure filter is used as filter medium.

3.      It has a new structure, good layout and is deemed as a "Mini Refinery".

4.      Very straightforward and evident effect, can also serve for multiple purposes.

5.      Can be tailored to meet the customized needs of individual customers.

Plate-frame-pressure oil filter is specially designed for power plant, power station, lubricating oil store of transformer substation of industry and mining, tractor station, petroleum, chemical industry, metallurgical industry, national defense industry, etc. It is used to filter transformer oil, turbine oil, aviation oil and other industrial oil and remove the micro moisture and impurities from the oil. When there is much water in the oil, the oil should be heated before filtering. If the oil is too dirty, it should be treated in other way to remove the impurities before fine filtering.
ZLA series are new-type oil filters improved, designed manufactured by this Institute and this Company. By installing the special oil pump, it has a stronger absorbing capacity to oil viscosity and larger suitable scope than the traditional technology.

Tech parameter

Plate-frame-pressure oil filter is specially designed for power plant, power station, lubricating oil store of transformer substation of industry and mining, tractor station, petroleum, chemical industry, metallurgical industry, national defense industry, etc. It is used to filter transformer oil, turbine oil, aviation oil and other industrial oil and remove the micro moisture and impurities from the oil. When there is much water in the oil, the oil should be heated before filtering. If the oil is too dirty, it should be treated in other way to remove the impurities before fine filtering.
ZLA series are new-type oil filters improved, designed manufactured by this Institute and this Company. By installing the special oil pump, it has a stronger absorbing capacity to oil viscosity and larger suitable scope than the traditional technology.

Tech parameter

Use
This kind of fillers is used for the large repairs or installation of oil equipment in large and mediate generating sets, petroleum, chemical industry, coal, mechanical, aviation and other industries. It is used to purify the mediate and low viscosity lubricating oil such as turbine oil, transformer oil, hydraulic oil, compressor oil, internal combustion engine oil, etc. It has the functions of purification, impurities removing, oil filling and pipe circuit cleaning, fine filtering and oiling and lubricating, etc.

Characteristics
The oil treated this way has a high purity. The particle-size can reach the grade MOOG 2?6. The flow capacity is large and the noise is little. The main types of this kind include Type ZJ?1, Type ZJ?2, Type ZJ?3, Type ZJ?4, Type ZJ?5, Type ZJ?6. In addition, the explosion-proof type, BLK?ZJ can be provided suitable for the environment prone to flame and/or explosion of some mine and industry. Also, the whole stainless steel type can be ready for you.

Parameter

Plate-frame-pressure oil filter is specially designed for power plant, power station, lubricating oil store of transformer substation of industry and mining, tractor station, petroleum, chemical industry, metallurgical industry, national defense industry, etc. It is used to filter transformer oil, turbine oil, aviation oil and other industrial oil and remove the micro moisture and impurities from the oil. When there is much water in the oil, the oil should be heated before filtering. If the oil is too dirty, it should be treated in other way to remove the impurities before fine filtering.
ZLA series are new-type oil filters improved, designed manufactured by this Institute and this Company. By installing the special oil pump, it has a stronger absorbing capacity to oil viscosity and larger suitable scope than the traditional technology.